10
WARNING
Seek assistance when removing the compressor from its packaging.
4.0
Remove the compressor from its packaging and inspect for any damaged parts.
If anything is found to be missing or damaged, contact your supplier.
4.1
Take care to transport the compressor correctly, do not overturn it or lift it with hooks
or ropes.
4.2
Position the compressor on a flat, level surface or with a maximum permissible
inclination of 10°.
4.3
Site in a well-ventilated area.
4.4
If the surface is inclined and smooth, check if the compressor moves whilst in operation.
4.5
If the surface is in a raised position, make sure the compressor cannot fall, securing
it in a suitable way.
4.6
Remove the transit plug from the oil hole and replace with the breather plug.
4.7
Check the oil level sits in the red circle of the oil glass sight window.
4.8
Connect your air supply hose to a ¼” male universal or industrial quick connector
coupler.
Connect the male quick connect coupler to the female quick connect coupler located
on the air compressor.
4.9
Make sure the drainage valve is off and that the pressure switch is in the OFF position.
4.10
Keep the voltage within ±4% of the rated value.
4.11
Insert the power supply cord into the power supply socket.
4. PREPERATION
