9
NOTE
Before starting the compressor, remove the travel plugs and install the air filter
and crank case breather plug.
3.0
Position the compressor in a flat, level surface with a maximum permissible
inclination of 10°
3.1
Site in a well-ventilated area.
3.2
If the surface is inclined and smooth, check that the compressor cannot move while
in operation.
3.3
If the surface is in a raised position, make sure the compressor cannot fall, securing
it in a suitable way.
3.4
Check the oil level sits in the red circle of the oil glass sight window.
3.5
Connect your air supply to a ¼” male universal or industrial quick connector coupler.
Connect the male quick connect coupler to the female quick connect coupler located
on the air compressor.
3.6
Make sure the drainage valve is off and that the pressure switch is in the ODD position.
3. PREPERATION
