13
ELECTRIC START
3.7
Turn the fuel switch (1) to the ‘ON’ position.
3.8
Turn the engine switch (2) to the ‘ON’ position.
3.9
Pull the choke knob (3) fully out.
NOTE:
if starting from warm, do not use the choke.
3.10
With the power switch in the ‘RUN’ position, rotate the ignition switch (4) to ‘START’
and hold there for 1 second or until the engine starts.
3.11
Release the switch back to the ‘RUN’ position.
5. STOPPING THE MACHINE
CAUTION
Switch off all loads and unplug then from the generator outlet sockets.
NEVER
start or stop the engine with electrical devices plugged in and turned on.
Switch the main breaker
OFF
(down).
4.0
Switch off all electrical loads and disconnect them.
4.1
Allow the engine to idle with no load, for 20 to 30 seconds.
4.2
Turn the engine switch to the ‘OFF’ position.
4.3
Turn the fuel switch to the ‘OFF’ position.
6. USING THE MACHINE
WARNING
Exhaust system heat and/or gasses could ignite combustible structures or damage
the fuel tank causing a fire resulting in property damage, serious injury or death.
Contact with the exhaust area could cause burn, resulting in serious injury.
DO NOT
touch hot parts and
AVOID
hot exhaust gasses.
You
MUST
allow the equipment to cool before touching.
3
4
2
1
