<<22>>
6.3) Output
and
Overload
I
ndicator
indicator light (red) is on. The AC output will be
switched off, but engine is
still running.
If the overload indicator light (red) is
,
on
disconnect the electrical appliances firstly, then
stop the engine, and start it again. If the overload
indicator light (red) is OFF and the output
indicator light (green) is ON, reconnect the
electrical appliances. Otherwise stop the engine
and check the generator.
In normal operating, output indicator light
(green) will remain on.
If the generator is overload (over 3.5kVA), or the
connected appliance
is short-circuit, the output
indicator light (green) is off
,
and overload
OVERLOAD
INDICATOR
LIGHT(RED)
OUTPUT INDICATOR
LIGHT (GREEN)
6.4) O
il
alert
system
The oil alert system is designed to prevent engine
damage caused by an insufficient amount of oil
in the crankcase. Before the oil level in the
crankcase falls below a safe limit, ECU
system will automatically shut down the engine
(the engine switch remains in the “On“
or
"
RUN
/
REMOTE
"
position).
If
the
oil
alert
system
shuts
down
the
engine
,
the
oil
alert
indicator
light
(
red
)
will
be
on
.
Check
the
engine
oil
level
.
OIL ALERT INDICATOR
LIGHT
(
RED
)
