background image

17 

 

 
 
 
 
10.0   

We do not offer a take back scheme for the recovery of Waste Electrical Electronic 

 

 

Equipment (WEEE) & Batteries. 

 

 

Instead the responsibility to dispose of WEEE and or Batteries is passed onto you by 

 

 

us. 

 

 

So when it becomes necessary to dispose of your machine you must take it to your 

 

 

local Civic Amenity Site. 

 

 

For further information please contact your local Authority for disposal advice.

 

10.1   

You MUST make sure that all unused oil and fuel is disposed of correctly either 

 

 

beforehand or at your local Civic Amenity Site. 

 

 

Under NO circumstances must any fuel or oil be put down any drains.

  

10.2   

Certain products contain WEEE waste which should not be disposed 

 

 

of in your domestic waste. 

10.3   

You MUST recycle WEEE in accordance with your local authority or 

 

 

recycling centre. 

10.4   

Certain products contain batteries which should not be disposed of 

 

 

in your domestic waste. 

10.5   

You MUST recycle batteries in accordance with your local authority or recycling 

 

 

centre. 

10.6   

Unwanted packaging and materials should be stored and taken to a recycling centre 

 

 

so it can be disposed of in a manner which is compatible with the environment. 

10.7   

The following symbol means that you should ‘Reduce – Reuse -   

 

 

Recycle’.

 

 

 
10.8   

We are a Member of the VALPAK National Compliance Scheme and our registration 

 

 

number is RM08660 

10.9   

For further information about disposal please contact your Local Authority. 

10.10   

You can also get more advice and guidance about recycling at the following website 

 

 

http://www.recycle-more.co.uk

 

10.11   

Should you pass this product on to another user either sold or loaned, you MUST 

 

 

pass on this user manual. 

 

 

This will make sure that all other users can use and maintain this machine safely. 

 

 

 

 

 

 

 

       10. RECYCLING AND PRODUCT DISPOSAL 

 

Summary of Contents for HY70100P





















Reviews: