3.3.
Installing the Trimmer Head.
3.3.1.
Make sure the HT lead is removed from the
spark plug.
3.3.2.
Ensure the brush cutter is switched off and be
sure the engine is fully stopped.
3.3.3.
Insert a ‘prevent rotational wrench’ or
equivalent into the back shield and the adaptor
semi-circle hole to prevent the output shaft
from turning.
3.3.4.
Loosen the nut with ‘T’ wrench by turning
counter-clockwise (view from top), then remove
spring washer, was her, cover cap, spacer and
cutter blade from the output shaft.
3.3.5.
Insert the shield on the fixed bracket, tighten
the screw.
3.3.6.
Remove the transportation guard.
3.3.7.
Tighten the Spool & Line Assembly on the
machine head bolt by tightening the centre nut
clockwise.
Page 9
Ver 4
Summary of Contents for HYBC3000
Page 1: ......
Page 17: ...9 SPARE PARTS HYBC3000 HYBC3000 Page 17 Ver 4...
