Hyundai HYUMAS950, Instruction Manual

– 

If you need to use an extension cord, it has to be uncorrupted and it has to comply with

the valid standards.

– Check regularly, if there are no signs of wear or damage on the pad or adaptor.

–  If the power cord of the appliance is corrupted, it has to be replaced by the producer, its 

service technician or a similarly qualified person so as to prevent dangerous situations.

– The adaptor and control switch must not be damaged by sharp or hot objects, naked 

flame or must not be immersed in water.

–  Never use the appliance for any other purpose than for that described in these 

instructions for use!

–  The producer does not undertake any responsibility for damage caused by improper use 

of the appliance (e.g. 

burning, fire, etc.

) and its guarantee does not cover the appliance 

in the case of failure to comply with the safety warning above.

II. FEATURES

A – massage pad 

(pic. 1)

B – control 

(pic. 2)

B1 - ON/OFF switch   

B5 – functions switch (FUNCTION)

B2 – massage zones indicator lights 

B6 – vibrations intensity (INTENSITY)

B3 – massage zones buttons   

B7 – vibration speed (SPEED)

B4 – massage functions indicator lights  B8 – power cord

C – AC adaptor

Distribution of the massage points in the pad 

(pic. 3)

1. 

neck area

2. 

back area

3. 

small area

4. 

thigh area

III. INSTRUCTIONS FOR USE

Remove all packaging material and remove the thermo-massage pad with accessories. 

Spread out the pad, place it e.g. on a bed, sofa, couch and fasten it with the straps. The 

pad must not be creased or wrinkled. Plug the adaptor connector 

C 

of the supply cord 

and then plug the adaptor into the el. plug. If you want to turn on the massage, press the 

B1

 button on the control. The first massage program will run. Indicators of areas being 

massaged will light up on the control. You may choose another setting on the control (e.g. 

intensity, vibration speed) see par. Control buttons functions. The appliance will turn off 

automatically after 15 minutes of operation (indicator lights 

B2

 and 

B4

 will turn off). If you 

wish to turn the appliance off sooner, press the 

B1

 button on the control (indicator lights 

B2

 and 

B4

 will turn off). Unplug the adaptor from the mains plug after using and then 

the connector from the supply cord socket of the massage pad. Slide the control into the 

pocket on the side of the massage pad 

A

.

Control button functions

The control 

B

 has 3 optional setting areas (

INTENSITY, FUNCTION, SPEED

) which may 

be changed during the massage. The 

B3

 area has buttons to activate / deactivate the 

individual massage zones and massage zones indicator lights 

B2

. If the red indicator light 

is on, the selected massage zone is active. If it is off, the zone is not active.

14

GB