ENG - 30
PREPARATION FOR USE
•
Carefully remove the unit from the display
carton and remove all packing material
from the unit.
•
Unwind the power cord and extend
it to its full length.
•
Unwind the FM Antenna wire and extend
it to its full length. Place the unit on
a stable, level surface, convenient to an
AC outlet out of a strong magnetic field.
•
Raise the lid to expose the phonograph.
Stylus cover
Tone arm lock level
•
Remove the opaque white plastic stylus cover
from the phonograph stylus by sliding it in the
direction of the arrow.
•
During this operation pay attention to the stylus,
because the stylus damage is not covered by
guarantee.
•
Remove the twist-tie that was used to secure
the tone arm during shipment.
•
Release the tone arm lock lever.
•
Connect the AC/DC adapter to AC 230 V 50 Hz
outlet and connect the DC 12 V to DC input jack.
POWER SOURCE
This product is designed to operate on normal 12 V 2A DC only. Attempting to operate this
system from any other power source may cause damage to the system, and such damage
is not covered by your warranty.
