It is possible to connect your portable media player to the car audio system for playback of the audio
tracks via the car speakers.
To get the best results when connecting the portable media to the car audio system, follow these
steps:
a. Use a 3.5mm stereo plug cable to connect the media player headphone socket at each end as
follows,
b. Adjust the portable media player to approximately 3/4 volume and start playback.
c. Press the MODE button on the car audio set until it's display shows "AUX MODE".
d. The volume and tone can now be adjusted on the car audio set to the desired level.
Note:
- The audio quality of your media player and the audio tracks on it may not be of the same sound
quality as the car audio system's CD player.
- If the sound of the media player is too low compared with the radio or CD, increase the volume of
the player.
- If the sound of the media player is too loud and/or distorted, decrease the volume of the player.
- When in AUX MODE, only the VOLUME, BASS, MID, TREBLE, EQ, and MODE functions of the
car audio set can be used.
- For technical information regarding the AUX input, refer to the specification section at the end of
this manual.
AUX PLAYER
Your Portable
Media Player
13
