②
①
①
POWER ON/OFF BUTTON
Press button
①
momentarily to turn the set on or off. When the set is next switched on, the
previous mode and disc play position will be restored.
①
VOLUME UP/DOWN CONTROL
Turn button
①
right to increase the volume level. The level will be shown as “VOLUME xx” on the
display panel. Turn button
①
left to decrease the volume level. After 5 seconds the display will
return to the previous mode.
①
START-UP VOLUME LEVEL SET UP
Start-up volume is the volume level the set will play at when next turned on. To adjust the start-up
volume, press and hold button
①
longer than 3 seconds. The current start-up volume level is
displayed as a flashing number on the display panel.
Turn button
①
left or right to increase or decrease the volume, then press button
①
again to set
that volume level as the start-up volume level.
②
SOUND SETTING SELECTION
This button is to adjust the sound. Each time you momentary press button
②
, LCD displays each
mode as follows :
BASS
→
MIDDLE
→
TREBLE
→
BAL L=R
→
FADER F=R
→
BEEP 2ND
→
LOUD ON
On each setting, the level can be controlled by turning button
②
. The display will automatically
return to the previous mode 5 seconds after the last adjustment is made.
Note:
When the EQ mode is activated, the BASS, MIDDLE, TREBLE and LOUD modes are not
displayed.
②
BASS CONTROL (1
ST
setting)
To adjust the bass tone level, first select the bass mode by pressing button
②
until “BASS”
appears on the display panel. Within 5 seconds of selecting the BASS mode, turn button
②
right
or left to adjust the bass level as desired. The bass level will be shown on the display panel from a
minimum of “BASS –10” to a maximum of “BASS+10”. The display will automatically return to the
normal indication in 5 seconds after the last adjustment, or when another function is activated.
GENERAL
4
