EN
EN - 55
CD PLAy
Use compact discs bearing the symbol shown below. In addition to conventional 12 cm CDs, this
system can be used to play 8 cm CDs.
1) Press the FUNCTION button repeatedly to select the “CD” function. “CD” appears and “READ”
blinks for several seconds, then the CD mode appears.
2) Press the OPEN/CLOSE button to open it, “OPEN” appears.
3) Place the disc with the label facing up on the disc turntable. ((Place only one disc at a time.)
4) Press the OPEN/CLOSE button again to close it, “READ” blinks for several seconds ,then the
total number of tracks and total playing time on the disc appear.
• Note: If a badly scratched disc is loaded or if the disc is loaded with the label facing down
-
ward. “NO DISC” appears.
If this occurs , load the disc correctly or replace the damaged disc.
5) Press the PLAY/PAUES
button (or
button on the remote controller). Play starts from the
first track. The current track number and elapsed playing time are displayed.
6) Press the
/MENU button (or STOP button on the remote controller) to end disc play
When the last track has been played, the player stops automatically.
• When a CD has been loaded you can select CD function and start playback by pressing the
PLAY/PAUES
button.
• Do not open the CD compartment during CD play,. Always press the STOP
button and wait
for the disc to stop rotating before opening the CD compartment.
Selecting the EQ mode (Remote controller
only)
Press the EQ button to select the EQ mode
matching the music to be listened to
FLAT: Flat music. etc
CLASSIC: Classical music. Etc
ROCK: Rock music.etc
POP: Pops.etc
JAZZ: Jazz.etc
Mute mode (Remote controller only)
Press the MUTE button, “MUTE” appears on
the display. The sound is muted. Press the
MUTE button again to return to normal mode.
And “MUTE” disappears.
whAI TO DO IF…
If the operation of the unit or display is not
normal even thought the appropriate buttons
have been pressed.
1. Unplug the AC adaptor.
2. Plug the AC adaptor .
3. Turn on the power and resume the operation.
