EN
EN - 31
TROUBLESHOOTING
Before resorting to maintenance service, please kindly check by yourself with the following chart.
Symptom
Cause(s)
Remedy
No Power
•
The AC power cord is not connected to
the power supply or is not connected to
a power supply securely.
•
Please check that the AC power
cord is connected securely.
Sound
There is no sound
or the sound is
distorted.
•
The audio cables aren't connected securely.
•
The volume is set to the minimum level.
•
The sound is switched off.
•
Connect the audio cables securely.
•
Turn up the volume.
•
Press [MUTE] on the remote control
to switch on the sound.
•
Press [PLAY / PAUSE].
Unable to play
a disc
•
This disc is placed in the disc tray in
a wrong way.
•
The unit isn't compatible with the disc.
•
The disc is dirty.
•
Check that the disc is placed in the
disc tray with its label side upwards.
•
/
•
Clean the disc.
The player
breaks down
when a USB
drive is inserted
into the player.
•
The connected USB drive is probably
not a certified one.
•
The player cannot play any uncertified
USB drive. In case the player breaks
down, turn it off, disconnect the power
cord from the AC outlet and unplug
the USB drive from the player. Then,
power on the player again. The player
will resume the normal status.
The buttons on
the unit doesn't
work.
•
The unit is being interfered with static
electricity etc.
•
Switch off and unplug the unit.
Then connect the plug to the power
supply and switch it on again.
The remote
control does not
function.
•
There is no battery in the remote control.
•
The batteries are out of charge.
•
The remote control isn't pointed to
the remote sensor.
•
The remote control is out of its operating
area.
•
The unit is shut down.
•
Install two AAA / 1.5 V batteries in it.
•
Replace the batteries with new ones.
•
Make sure that the remote control is
pointed to the remote control sensor.
•
Make sure the remote control is
within the operating area.
•
Switch off the unit and disconnect it
from the AC outlet. Then power on
the unit again.
