EN - 32
USB OPERATION
GENERAL OPERATION
PLAy / PAUSE
Press to start playing tracks from the USB.
Press again to stop playing USB operation temporarily.
Press again to resume playback.
SKIP +
Press to go to the next track or back to the previous track.
SKIP -
Press and hold while playing until you find the point of the sound.
STOP
Press to stop all USB operation.
PLAyBACK
1) Plug or slot in USB device to the port. (Make sure no disc on disc tray)
2) Set the “FUNCTION” selector to “CD / MP3” mode.
3) Press and hold the “PLAY / PAUSE” button for a few seconds to entry USB mode.
4) Playback will start automatically from the first track.
5) Press the “STOP” button when finished.
6) Press the “PLAY / PAUSE” button again, playback will start from the first track.
PROGRAM, MODE
The operation of PROGRAM, MODE are as the same as that of CD / MP3.
Please refer to CD / MP3 OPERATION.
OTHER FEATURES
CLOCK SETTING
1) Press the “TIME SET” button. (Do not release “TIME SET” button during time setting.
2) Press the “HOUR” button to set hour.
3) Press the “MINUTE” button to set minute.
4) Release all button to confirm setting. Confirmed setting will on the display.
AUX IN
1) Use a 3.5 mm Male-to-Male Stereo cable to connect any external audio device
with a 3.5 mm.
Headphone or Ling-Out jack to the AUX IN jack on the front panel of the stereo.
2) Start playback on the external audio device. Adjust the volume on the audio device
(do not set the volume too high to avoid distortion).
You may also adjust the volume on the appliance.
3) To control playback function, use the controls provided by the external audio device.
Summary of Contents for MS 820 AU3
Page 42: ...Poznámky Notatka Notes Megjegyzés ...
Page 47: ...Poznámky Notatka Notes Megjegyzés ...
Page 48: ......
