EN - 70
SYSTEM SETUP
MENU OPERATION
1) In DVD mode, press [SETUP] on the remote control to display the setup menu.
2) Press [←] / [→] to select an item. The submenu of the selected item will be displayed below
instantly.
3) Press [↑] / [↓] to select an item you desire to set in the submenu, then press [ENTER] / [→]
to enter. Use [↑] / [↓] to select an option, then press [ENTER] to confirm it, or press [←]
to cancel.
4) Then you can press [↑] / [↓] to continue to set other items in the submenu.
5) Press [←] to go back to the superior menu of the current one.
6) Press [SETUP] again to exit the setup menu.
1. GENERAL SETUP PAGE
1.1. TV DISPLAY
If the unit is connected to a conventional TV set, you are supposed to select 4:3 PANSCAN
or 4:3 LETTERBOX. The 4:3 image will be displayed in full screen in its native aspect ratio.
4:3 PAN SCAN: The wide-screen image will be displayed on the screen in its native aspect ratio
with some part on the left and right cut off.
4:3 LETTERBOX: The wide-screen image will be displayed in its native aspect ratio with black
borders on the top side and the bottom side.
If the unit is connected to a wide-screen TV set, you are supposed to select 16:9.
16: 9: The wide-screen image will be displayed in full screen in its native aspect ratio while
the 4:3 image will be stretched out horizontally to fit in the screen.
1.2 ANGLE MARK
Set this item to ON. When a disc encoded with multiple camera angles is playing, the angle
mark will display on the screen. Then you can view the video of different camera angles by
pressing [ANGLE] on the remote control. Set this item to OFF to disable this function.
NOTE:
This function only works with those discs encoded with multiple camera angles.
1.3 OSD LANGUAGE (On-Screen Display Language)
Set the on-screen display language in this item.
1.4 CLOSED CAPTIONS
Set this item to ON. When a disc encoded with closed captions, the closed captions will be
shown on the screen. Set this item to OFF to hide it.
You can also press [SUBTITLE] on the remote control to show or hide the closed captions.
NOTE:
This function only works with those discs encoded with closed captions.
1.5 SCREEN SAVER
ON: If the image remains motionless on the screen, for example the disc is paused, stopped
etc, for several minutes, a screen saver will appear on the screen. You can press any key
or button except [STANDBY] to wake it up. OFF: Disable the screen saver function.
1.6 LAST MEMORY
ON: During playback or in the paused/stopped status each time you open the disc tray or turn
off the player, the unit will memorize the last playback time. Next time when you insert the same
disc and close the disc tray to load the disc, the unit will play from the memorized point.
OFF: Disable the last memory function.
Summary of Contents for MSD 861 DRU
Page 111: ...Poznámky Notatka Notes Megjegyzés ...
