ENG - 21
ENG
Pulling out the filters and emptying the contents of the dust container into a suitable vessel
or bag. (The filter can be shaken clean or cleaned and rinsed using warm water. Make sure
that the parts are dry before they are assembled.)
Re-install the components
Firstly Re-install the filter after the filter baffle plate in the dust container. Place to match up
with the both ventilation positions. Secondly assembling the dust container following up the
opposite procedures when detaching the dust container.
Cleaning the brush
If the brush becomes blocked or jammed for any reason, the vacuum will be lower down. The
brush may then need to be cleaned. First turn off the device, and then carefully use a pair of
scissors or a sharp knife to remove any items such as threads that may have become entang
-
led.
Cleaning of wheel axles
If a wheel is jammed by threads or dirt:
Remove the wheels by carefully prizing them loose using a screwdriver inserted into the cavi
-
ty. Remove threads or any other objects that may have become jammed in the wheels axles.
Reassemble the wheels by pressing them tightly together.
2)
3)
Summary of Contents for NC 020O
Page 27: ...Pozn mky Notatka Notes...
Page 28: ...Seoul Korea...
