EN - 75
EN
SETUP Menu Setting
General Setup Page
Angle Mark
Displays current angle setting information on the
right hand corner of the TFT screen if available
on the disc.
1. Press
to highlight ‚Angle Mark‘.
2. Enter its submenu by pressing
.
3. Move the cursor by pressing to highlight
the selected item.
→
On
: Enable Angle Mark.
→ Off: Disable the current angle setting display.
OSD Lang
You can select your own preferred language
seetings. This DVD system will automatically
switch to the selected language whenever
you load a disc. If the language selected is not
available on the disc, the disc‘s default language
will be used instead. The OSD language in the
system menu will remain once selected.
1. Press
the keys to highlight ‚OSD Lang‘
2. Enter its submenu by pressing
.
3. Move the cursor by pressing
the to high
-
light the selected item.
4. Select a language and press ENTER.
SPDIF Output
The function is used to select the SPDIF Output:
SPDIF Off, SPDIF/RAW, SPDIF/PCM.
1. Press the keys
to highlight ‚SPDIF Output‘.
2. Enter its submenu by pressing
.
3. Move the cursor by pressing
the keys to
highlight the selected item.
Set the SPDIF Output according to your optional
audio equipment connection.
→
SPDIF Off:
Turns off the SPDIF output.
→
SPDIF/RAW:
If you have connected your
DIGITAL AUDIO OUT
to a multi-channel deco
-
der/receiver.
→
SPDIF/PCM
: Only if your receiver is not
capable of decoding multi-channel audio.
