EN - 10
SySTEM
Laser
: Semiconductor laser, wavelength 650 nm
Signal system
: NTSC / PAL
Frequency response
: 20 Hz to 20 kHz (1 dB)
Signal-to-noise ratio
: More than 80 dB (ANALOG OUT connectors only)
Dynamic range
: More than 85 dB (DVD/CD)
Note:
Design and specifications are subject to change prior notice.
BATTERy PARAMETERS
Battery Specifications:
Output: 7.4 V
Standard charge time: 2 h ~ 4 h (Varies according to battery capacity)
Discharge Time: About 2 h (Varies according to battery capacity)
Storage and work circumstances
1. Storage circumstances
6 months
1 week
Temperature
-20 °C ~ +45 °C
-20 °C ~ +65 °C
Humidity
65 ± 20 %
65 ± 20 %
2. Work circumstances
Standard charge
Standard discharge
Temperature
0 °C ~ +45 °C
-20 °C ~ +65 °C
Humidity
65 ± 20 %
65 ± 20 %
fIRST TIME INSTALLATION
After all connections have been made properly, switch on TV and makesure the receiver
is connected to the Main Power. Press Power Button toswitch receiver on. If you are using
the receiver for the firs time or restored to Factory Default, the Main Menu will appear on your
TV screen.
1) Select [OSD Language] and press RIGHT/LEFT key to select an language.
2) Select [Country] and press RIGHT/LEFT key to select your country of residence.
3) Select [Channel Search] and press RIGHT or OK key to begin Automatic channel search.
4) Once channel tuning is complete, you are now ready to watch TV.
