ENG - 66
1.6 LAST MEMORY
ON:
During a playback or in a paused status each time you open the disc tray, the unit will
memorize the last playback time. Next time when you insert the same disc and close the disc
tray to load the disc, the unit will play from the memorized point. Note that the above-mentioned
operation is invalid if you ever turn off the unit during the operation.
OFF:
Disable the last memory function.
2 AUDIO SETUP PAGE
There are three items in the AUDIO SETUP PAGE. They
are ANALOG AUDIO, DIGITAL AUDIO and DOLBY
DIGITAL.
2.1 ANALOG AUDIO
2.1.1 DOWNMIX
LT/RT:
The 5.1-channel audio is mixed into left channel and right channel and is output
via the FL and FR speaker respectively.
STEREO:
The 5.1-channel audio is mixed into stereo signal and is output via the FL
and FR speaker.
NOTE:
This function only applies to the Dolby AC -3 encoded 5.1-channel discs.
2.2. DIGITAL AUDIO
2.2.1 DIGITAL OUTPUT
SPDIF/ OFF:
There will be no digital audio signal output. (Coaxial off)
SPDIF/RAW:
The digital audio signal output will be in raw format.
SPDIF/PCM:
The digital audio signal output will be in PCM format.
2.3 DOLBY DIGITAL
2.3.1 DUAL MONO
STEREO:
The player outputs the left-channel audio and right-channel audio via the FL
and FR speaker respectively.
L-MONO:
The player outputs the left-channel audio only via both the FL and FR
speaker.
R- MONO:
The player outputs the right-channel audio only via both the FL and FR
speaker.
MIX- MONO:
The player outputs the average signal of the left-channel and rightchannel
audio via the FL speaker and the FR speaker
NOTE:
This function only applies to the Dolby AC -3 encoded 2-channel discs.
2.3.2 DYNAMIC
When you watch films with large dynamic scope in low volume, for example at night, you can
adjust the dynamic value up to avoid losing sound details resulting from the low volume.
Summary of Contents for PDP735SU
Page 74: ...Pozn mky Notatka Notes...
Page 79: ...Pozn mky Notatka Notes...
Page 80: ...Seoul Korea...
