ENG - 72
TROUBLESHOOTING
Before resorting to maintenance service, please kindly check by yourself with the
following chart.
Symptom
Cause(s)
Remedy
No Power
The adapter is not connected to the
unit securely or is not connected to the
power supply.
The unit is turned off.
•
•
Connect the adapter to the DC input jack
securely and then plug the adapter into
an AC outlet (for AC/DC adapter) or the
cigarette lighter socket of a car (for ciga
-
rette lighter adapter).
Make sure that the unit is turned on.
•
•
Picture
There is no
picture dis
-
played on the
connected
TV.
The TV is not connected to this unit
securely with the AV cable.
•
Connect the AV OUT jack of this unit and
the AV IN jack of a TV securely with an
AV cable.
•
Sound
There is no
sound.
The volume is set to the lowest level.
The sound is switched off.
The disc is in fast forward/reverse
playback.
The sound is output through the con
-
nected earphone.
•
•
•
•
Turn up the volume.
Press [MUTE] to switch on the sound.
Press [PLAY] to resume the normal play
-
back.
Pull out the earphone and the sound will
output through the built-in speakers.
•
•
•
•
Unable to
play a disc
This disc is placed in the disc tray in a
wrong way.
The unit isn‘t compatible with the disc.
The disc is dirty.
•
•
•
Check that the disc is placed in the disc
tray with its label side upwards.
Clean the disc.
•
•
The player
breaks down
when a USB
drive or
memory card
is inserted
into the
player.
The connected USB drive or the
memory card is probably not a certified
one.
•
The player cannot play any uncertified
USB drive and memory card. In case
the player breaks down, turn it off, dis
-
connect the power cord from the AC
outlet and unplug the USB drive or/and
the memory card from the player. Then,
power on the player again. The player
will resume the normal status.
•
The remote
control does
not
function.
There is no battery in the remote con
-
trol.
The battery is out of charge.
The remote control isn‘t pointed to the
remote sensor.
The remote control is out of its
operating area.
The unit is shut down.
•
•
•
•
•
Install a CR2025 lithium battery in it.
Replace the battery with a new one.
Make sure that the remote control is
pointed to the remote control sensor.
Make sure the remote control is within
the operating area.
Switch off the unit and disconnect it from
the AC outlet. Then power on the unit
again.
•
•
•
•
•
Summary of Contents for PDP735SU
Page 74: ...Pozn mky Notatka Notes...
Page 79: ...Pozn mky Notatka Notes...
Page 80: ...Seoul Korea...
