EN
EN - 9
PAL
- Select this if the connected TV is PAL system.
It will change the video signal of a NTSC disc and output in PAL format.
NTSC
-Select this if the connected TV is NTSC system.It will change the video signal
of a PAL disc and output in NTSC format.
Auto:
Chang the video signal output automatic according to the playing disk format.
•
Audio:
Selects a language for audio (if available).
•
Subtitle:
Selects a language for subtitle (if available).
•
Disc Menu:
Selects a language for disc menu (if available).
•
Parental
Some DVDs may have a parental level assigned to the complete disc or to certain scenes
on the disc.This feature lets you set a playback limitation level. The rating levels are from
1 to 8 and are country dependent. You can prohibit the playing of certain discs that are not
suitable for your children or have certain discs played with alternative scenes.
•
Default:
Back to the factory setting.
PASSwORD SeTUP PAGe
•
Password Setup Page
•
Password mode:
Set password mode on/off.
If set to off, change parental level will not check password.
•
Password:
select the menu password change page.
OLD PASSwORD:
Enter the OLD password (Factory setting is 1369) and the cursor will jump
automatically to NEW PASSWORD.
New PASSwORD:
Enter the NEW password. Enter 4 digits from the remote control unit
numeric buttons, and the cursor will automatically jump to CONFIRM PASSWORD.
CONfIRM PASSwORD:
Confirm the NEW password by entering it again.
If the confirmation is incorrect, the cursor will stay in this column.
After entering, the correct new password again, the cursor will jump automatically to OK.
OK:
When cursor is on this button, press ENTER key to confirm setting.
