7-53
Remove the sun gear (1-17).
1-17
Θ
R35Z77SM21
Remove the holder (1-11) and other
associated parts.
Secure the holder (1-11) in a vice and
loosen the screw (1-16) to remove the
thrust plate (1-15).
The screw is hard to remove because
loctite was used during assembly. To
facilitate the removal of the screw, warm
the screw with a drier.
Remove the following parts.
1-10
1-10
1-14
1-13
1-12
1-15
1-16
1-11
Ι
¤Œ
ö
Λ
R35Z77SM22
R35Z77SM23
(1-14)
(1-13)
(1-12)
Planetary gear
Needle bearing
Inner race
When replacing the taper roller bearings
(1-6) and (1-8), the collar (1-3) and the
plate (1-4), they are to be replaced by the
body assembly.
Remove the following parts.
1-9
1-8
ö
Μ
(1-9)
(1-10)
Plate
Collar
R35Z77SM24
