7-87
Install check valve (31-2), spring (31-3)
and plug (31-4) with O-ring (31-5) to
plunger (31-1).
Apply a slight grease to the O-ring.
Â
Tools required :
Torque wrench (No. 2)
Hexagonal bit for torque wrench (No. 8)
Tightening torque : 3.3
Ü
0.2 kgf
Â
m
(23.5
Ü
1.8 lbf
Â
ft)
(33)
31-1
31-2
31-3
31-4
31-5
R35Z77TM75
Install plunger assy (31) on base plate
(30).
Install it while turning to prevent it from
sticking.
Apply hydraulic oil to plunger assy (31)
before installation.
31
R35Z77TM05
Place spring (37) and spring seat (36) in.
37
36
37
36
R35Z77TM04
Tighten cap (38) with O-ring (39).
Apply a slight grease to the O-ring.
Â
Tools required :
Torque wrench (No. 3)
Hexagonal bit for torque wrench (No. 10)
Tightening torque : 24.5
Ü
0.5 kgf
Â
m
(177
Ü
3.7 lbf
Â
ft)
38
38
R35Z77TM03
(34)
(35)
(36)
