background image

KEEP RIDERS OFF EXCAVATOR

KEEP RIDERS OFF EXCAVATOR

Only allow the operator on the excavator.   Keep 
riders off.

Riders on excavator are subject to injury such 
as being struck by foreign objects and being 
thrown off the excavator.   Riders also obstruct 
the operator's view resulting in the excavator 
being operated in an unsafe manner.

MOVE AND OPERATE MACHINE SAFELY

MOVE AND OPERATE MACHINE SAFELY

Bystanders can be run over.   Know the location 
of bystanders before moving, swinging, or 
operating the machine.

Always keep the travel alarm in working 
condition.   It warns people when the excavator 
starts to move.

Use a signal person when moving, swinging, or 
operating the machine in congested areas.   
Coordinate hand signals before starting the 
excavator.

OPERATE ONLY FORM OPERATOR'S SEAT

OPERATE ONLY FORM OPERATOR'S SEAT

Avoid possible injury machine damage.   Do not 
star t engine by shor ting across star ter 
terminals.

NEVER start engine while standing on ground.   
Start engine only from operator's seat.

PARK MACHINE SAFELY

PARK MACHINE SAFELY

Before working on the machine:

·

Park machine on a level surface.

·

Lower bucket to the ground.

·

Turn auto idle switch off.

·

Run engine at 1/2 speed without load for 2 minutes.

·

Turn key switch to OFF to stop engine.   Remove key

 from 

switch.

·

Move pilot control shutoff lever to locked position.

·

Allow engine to cool.

1-3

13031GE08

13031GE09

13031GE26

Summary of Contents for Robex 235LCR-9










































Reviews: