ENG - 54
PLAyBACK OF MP3/WMA SONG VIA USB STORAGE MEDIA OR MEMORy
CARD
CONNECTING
the system is able to decode and playback all MP3 file which stored in the memory media with
USB connecting port, multi- media CARD (MMC) or secure digital (SD) memory CARD.
press FUNCTION button (10) repeatedly to select “ USB ” or “ SD CARD “ mode.
plug-in the USB pen-drive with the face up & make sure it going into completely or insert the
memory CARD in the direction of the symbol which next to the SD CARD slot. insert straight
without bending.
- connecting the USB / memory CARD upside down or backwards could damage
the audio system or the storage media (USB / memory CARD). check to be sure the
direction is correct before connection.
the system will start reading the storage media automatically after connecting, and LCD
display (2) will show the total number of MP3/WMA files and total number of album being
detected.
repeat the same playback procedure as playing CD/MP3 disc as above
Remark:
the system can detect and read the file under MP3 and WMA format only though the USB
port/memory CARD slot.
if connect the system to MP3 player via the USB socket, due to variances in MP3 encoding
format, some MP3 player may not be able to PLAy via the USB socket. this is not the malfun
-
ction of the system.
USB port does not support connection with USB extension cable and is not designed for com
-
munication with computer directly.
ENCODING OF CD FILE INTO MP3 FILE
The system is able to encode normal CD/phone/TAPE to MP3 format and recording at memo
-
ry media with USB connecting port, multi- media CARD (MMC) or secure digital (SD) memory
CARD.
A) CD ENCODING
I) ecnoding 1 track
perform normal playback of the CD track you want to encode & RECORD,
press „
=
REC “ button (14) during the playback of the desire track, unit will display “ USB “
or “ CARD “ & flashing. (if both soruce are ready during recroding). then press “ skip up
:
či
9
buttons (26,12) to select and then press “
=
button (14) to confirm.
the system will show “USB” or “CARD” & „
“ and flashing. encoding is performing now.
press “ STOP
<
/ BAND ” button (8) to terminate the recroidng.
1)
2)
3)
4)
-
-
-
1)
2)
3)
4)
