ENG
ENG - 55
II) encoding 1 entire disc
repeat the same procedures (1) to (3) as sipulated above until the system starting encoding
of 1 track.
then press again the
=
REC “ button (14) one more time and “ REC all “ will show once ON
LCD display (2)
after completing of encoding of th entire disc, unit will STOP playback automatically.
Remark:
the recording speed is 1:1 and according to the actual plying time of the CD track
the system will creat a “ audio “ folder and then store the encoding track in it.
the recording format is preset at – MP3 bit rate : 128 kbps, sampling rate : 44.1khz
no song title/alabum name/artis name will be recorded during encoding mode
to interrupt the recroding, press the “ STOP
<
/ BAND ” button (8) during RECORD mode.
always insert either one type of memory media “ USB pen-drive “ or “SD/MMC CARD “ for
encoding.
recording will be completed only entire song being encoded, if terminate the encoding pro
-
cess intermediately, there is no track being recorded nor stored to the USB or SD/MMC
CARD
III) copying of MP3/WMA file
if putting a MP3/WMA disc instead of a CD-disc, the system will copy the files to the USB or
SD/MMC CARD if press the „
=
REC “ button (14). the operation procedures is same as CD
encoding as stipulate ON above, and the system will switch to copying mode only if MP3/WMA
file being read.
Remark:
the system will creat a “ fcopy “ folder and then store all copied track in it.
if press the „
=
REC “ button (14) during playback of USB or SD source, the file will copy
from USB to SD or SD to USB.
copying will be completed only entire song being copy, if terminate the copy process inter
-
mediately, there is no track being recorded nor stored to the USB or SD/MMC CARD
B) CASSETE ENCODING
select to “ TAPE ” mode from FUNCTION selector (10) and then press the „
=
REC “ button
(14) directly.
the LCD display (2) with show the word “ USB “ or “ CARD “ and „
“ & flashing, now the
system is starting the encoding mode.
start playback of the cassette TAPE which the track you prepare to RECORD.
after finish of recoding, press the “ STOP
<
/ BAND ” button (8) until the text ON LCD (2)
STOP flashing and return to “ TAPE “ mode.
C) PHONO ENCODING
press the FUNCTION button (14) to “ PHONO “ mode and then press the “ REC “ button
(25) directly.
the LCD display with show the word “ USB “ or “ SD “ and then flashing, and then display „
“ & „
“ and flashing after few seconds. now the system is starting the encoding mode.
start playback at PHONO for the track which you want to recording.
after finish of recoding, press the : CD STOP “ button (20) until the LCD STOP flashing and
return to “ PHONO “ mode.
1)
2)
3)
-
-
-
-
-
-
-
-
-
-
1)
2)
3)
4)
1)
2)
3)
4)
