ENG
ENG - 31
•
Always press the STOP/EJECT key when changing the direction or stopping the tape. This
prevents damage to the machine and the tape.
•
If the STOP/EJECT button is pressed again the flap of the cassette compartment opens.
•
In order to interrupt playback briefly, press the PAUSE button. Pressing again continues
playback.
PLAYING CD / MP3
•
Select the CD mode with the “STANDBY / FUNCTION” button.
•
Open the CD compartment by pulling the lid upwards by the tab.
•
Insert an audio CD with the printed side facing upwards on to the central cone so that the
CD clicks into place and then close the lid of the CD compartment.
•
After a few seconds the total number of songs/tracks is shown in the display.
NOTE: In the case of CDs in MP3 format the number of folders is briefly displayed at first.
•
The CD will play from the first title.
•
In order to remove a CD, please press the STOP button, open the CD compartment and lift
the CD out carefully.
•
Always keep the CD deck closed.
NOTE: If a disc is inserted the wrong way around, respectively if no disc is inserted, then the
message “NO “ appears on the display. Playback of CDs produced by the user cannot be gua
-
ranteed due to the large variety of software and CD media available.
PLAYING USB
This device has been developed in line with the latest technical advances in the USB field. The
wide range of different USB storage devices of all types which are currently on the market, un
-
fortunately do not allow us to guarantee full compatibility with all USB storage devices. For this
reason, in rare cases there may be problems in playing back files from USB storage devices.
This is not a malfunction of the device.
•
Select the USB mode with the “STANDBY / FUNCTION” button.
•
Connect a USB storage device directly into the port. The display briefly shows the number
of folders and then the total number of tracks. Playback will automatically start after a few
seconds.
For operation, please refer to the section “Description of the control buttons”.
NOTE: Always directly connect a USB storage medium to the USB port to prevent any malfunc
-
tions. The USB port is not designed for charging external devices.
CAUTION:
Switch the device to a different operating mode before you remove the USB storage device
DESCRIPTION OF THE CONTROL BUTTONS
NOTE: Not all the functions may be supported depending on the playback device
PLAY / PAUSE / CLOCK
•
You can briefly interrupt and resume playback using this button. The display shows the
elapsed playback time flashing. Pressing again continues playback.
•
Press and hold this button during operation to briefly display the current time.
SKIP+ & SKIP-
With SKIP + you can jump to the next track.
• If the button is kept pressed down, the machine starts to search through the tracks.
The SKIP - button can be used as follows:
•
Press once = This starts the current track again from the beginning.
•
Press twice = This jumps back to the previous track.
Summary of Contents for TRC 333 AU3BT
Page 43: ......