Hyundai U90, User Manual

10

Troubleshooting

What you see

Ensure that the power cord is firmly connected and the LCD
monitor is on.

“ VIDEO MODE NOT 

SUPPORTED ” message

“NO SIGNAL” message

Screen is blank and power indictor

is off

�

Check  the  maximum  resolution  and  the  frequency  of  the
video adaptor.

�

Compare these values with the data in the Display Modes
Timing Chart.

�

Ensure  that  the  signal  cable  is  firmly  connected  to  the  PC
or video sources.

�

Ensure that the PC or video sources are turned on.

The image is too light or too dark

�

Adjust the Brightness and Contrast.

�

Refer  to the Brightness/Contrast

The image color is not good

�

Adjust the Color 

�

Refer to the Color

Image is not centered on the

screen

�

Executes “Auto Adjustment”.

The power lamp flickers.

�

The monitor is using its power management system.

�

Move  the  computer’s  mouse  or  press  a  key  on  the  key-
board.

Image is not stable and may

appear to vibrate

�

Check that the display resolution and frequency from your
PC  or  video  board  is  an  available  mode  for  your  monitor.
On your computer check : Control Panel, Display, Settings

�

Note : Your  monitor  supports  multiscan  display  functions

within the following frequency domain:

Suggested Actions

6