Hyundai WS 1817, Instruction Manual

EN - 27

EN

5. Operation manual:

5.1 General operation:

Press“MODE”button to switch to TIME & ALARM mode

In TIME display, hold“MODE”to enter the time setting mode

In ALARM display, hold“MODE”to enter Alarm setting mode

Press“DOWN”button to switch on / off Alarm

Hold“DOWN”over 2 sec to enter RCC receive mode

Press“UP”to check the max/min temperature & humidity record

Hold “UP”over 2 sec to delete the temperature & humidity history

Press“ALERT”to switch on / off temperature alert

Hold“ALERT”over 2 sec to enter temperature alert setting mode

Press“CHANNEL”to select the RF channel, display sequence: CH1>CH2>CH3>CH1

Hold“CHANNEL” over 2 sec, re-register current channel

In RCC receive condition, hold“DOWN”over 2 sec to stop the RCC receive mode

When ALARM, press“SNOOZE ”to enter the snooze mode, 5 minutes alarm interruption

5.2 Time setting mode:

Press“MODE”to enter TIME display

Hold“MODE”over 2 sec to enter time setting mode

Setting sequence:12/24, OFFSET, Language, Year, Month, Day, Hour, Minute

Press “UP”, setting value goes up one step, hold 2 second, setting value goes up 8 steps

Press“DOWN”, setting value goes down one step, hold 2 second, setting value goes down 8 

steps

Press “MODE” to confirm the settings

Moon dial display & weekday display change according to the calendar

Will auto quit the setting mode after not pressing any buttons for 8 sec 

5.3 Alarm setting mode:

Press“MODE”to switch to ALARM display

Hold“MODE”over 2sec to enter alarm setting mode

Setting sequence: Hour, minute

Press “UP”, setting value goes up one step, hold 2 second, setting value goes up 8 steps

Press“DOWN”, setting value goes down one step, hold 2 second, setting value goes down 8 

steps

Press “MODE” to confirm the settings

Will auto quit the setting mode after not pressing any buttons for 8 sec

Press“ALARM”to switch on/off alarm function

5.4 Temperature alert setting

Hold“ALERT” over 2 sec to enter ALERT setting

Setting sequence. Max>Min>Quit

When setting max/min temperature, press“CHANNEL”to change the Channel

Default maximum temperature is +70% minimum is -50%

Press“Alert”to confirm settings and jump to another setting mode

Press “UP” setting value goes up one step hold 2 second, setting value goes up 8 steps

Press“DOWN” setting value goes down one step hold 2 second, setting value goes down 8 

steps

Will auto quit the setting mode after not pressing any buttons for 8 sec

After completing the settings Alert will switch on automatically

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•