EN
EN - 25
6.5 Temperature & Humidity Alert function:
• When viewing indoor or outdoor channel, press “ALERT” button to select to activate the alert
function for this channel. Once ALERT function is activated, the icon “ ” appears on the LCD.
When viewing Indoor Channel, press ALERT button select to:
Activate Indoor Temperature Alert function
Activate Indoor Humidity Alert function
Activate Indoor temp. & Humidity Alert function
Deactivate Alert function for Indoor Temp&Humidity
• Hold “ALERT” button for 3 seconds to enter Temperature & Humidity Alert setting. Icon “ ”
beside Temperature’s digits flash. Press “▲” or “▼” button to select alert setting for Indoor or
Outdoor Temperature & Humidity, Press “ALERT” button to confirm the setting.
• Setting Sequence as follow: Upper limit of temperature, Lower limit of Temperature, Upper
limit of Humidity, Lower limit of Humidity.
• Press “▲” (B2) or “▼” (B4) button to set the upper “ ” and lower “ ” limit of the temperature.
Press “ALERT“ button (B5) to confirm the setting, and move to the Humidity alert setting.
Press “▲” (B2) or “▼“ (B4) button to set the upper “ ” and lower “ ” limit of the Humidity,
press “ALERT” button to confirm and quit the setting.
• When it’s alert, the corresponding icon “ ” or “ ” would flash on the LCD. Press any buttons
to stop the alert sound, otherwise, it will sound for 2 minutes, and stop automatically.
Note:
The Setting Mode will automatically exit in 15 seconds without any adjustment.
6.6 frost Alert
“
” is shown if the outdoor temperature (any channel) is between -2 °C ~ +3 °C.
7. LOw BATTERy
The low battery icon “ ” will appear at particular channel indicating that thermo sensor unit
of the channel is in low battery status. The batteries should be replaced.
Summary of Contents for WS 2215
Page 43: ...Pozn mky Notatka Notes Megjegyz s...
Page 44: ......
