EN - 30
7. THERMOMETER
7.1 RF Transmission Procedure:
•
The main unit automatically starts receiving transmission from outdoor thermo sensor for outdoor
temperature & humidity after weather condition setting.
•
The outdoor sensor will automatically transmit temperature and humidity signal to the main
unit after batteries inserted.
•
If main unit failed to receive transmission from outdoor thermo sensor in first 3 minutes after
the batteries inserted (“- - . –” display on the LCD), hold “SEARCH” button (B9) for 3 seconds
to receive transmission manually. RF icon “
”.
7.2 Temperature & Humidity
(1) Past 24 Hours Maximum / Minimum Outdoor Temperature and Humidity
•
After start up, the unit automatically shows past 24 hours maximum outdoor temperature and
humidity record. “
MAX
” show on the LCD
•
After start up, the unit automatically shows past 24 hours minimum outdoor temperature and
humidity record. “
MIN
” show on the LCD.
(2) Recorded Maximum/Minimum Outdoor Temperature and Humidity from Start-up / Reset
•
Press “MEMORY” button (B3) to view the maximum and minimum temperature and humidity
record from start-up or reset. “
” flash on the LCD.
•
When viewing the memory record, hold “MEMORY” button for 3 seconds to clear the maximum
and minimum record.
•
When viewing the memory record, press “MEMORY” button (B3) again to check the corresponded
time and date for memory maximum and minimum temperature & humidity record. The memory
record value and corresponded time and date flash. Press “MEMORY” button select to view:
•
Time & date for minimum temperature memory record, Time & date for minimum humidity
memory record, Time and date for maximum temperature memory record, Time and date for
maximum humidity memory record.
(3) Celsius / Fahrenheit
•
Press “°C / °F” button (B5) to select Indoor / Outdoor Temperature in Celsius mode or
Fahrenheit mode.
•
If the temperature is out of the measurable range, LL.L (beyond the minimum temperature)
or HH.H (beyond the maximum temperature) will be shown on the LCD.
(4) Humidity
•
The humidity measurable range is 20 % ~ 99 %. If the current humidity measurement is lower
than 20 %, the LCD would display
.
•
For past 24 hours or memory maximum or minimum temperature and humidity record.
If the record is lower than 20 %, the LCD would display
.
