EN - 28
3. OUTDOOR THERMO SENSOR
D1: Transmission Indication LED
D2: Temperature Display
D3: Battery Compartment
D4: Wall Mount Hole
D5: “RESET” button
D6: “C/F” button
D7: Stand
D8: Cable probe
4.GETTING STARTED
4.1 Main Unit:
•
Open main unit battery compartment cover
•
Insert 3 x AAA batteries observing polarity [ “+” and “−” marks]
•
Replace main unit battery compartment cover
•
Replace main unit battery compartment cover, the main unit is now ready for use.
4.2 Outdoor Thermo Sensor
•
Batteries compartment (D3) of thermo sensor is locating behind the back cover
•
Insert 2 x AAA batteries observing polarity [ “+” and “–” marks]
5. INSTALLATION
5.1 Main Unit
Placed the main unit can be placed onto any flat surface.
5.2 Outdoor Thermo sensor
The remote sensor should be securely mounted onto a horizontal surface.
Note:
Transmissions between receiver and transmitter can reach up to 30 m in open area.
Open Area: there are no interfering obstacles such as buildings, trees, vehicles, high voltage
lines, etc.