Hyundai WS870W, Instruction Manual

EN - 11

EN

3.2 NORMAL STATES

Click”MODE”to switch alarm time and current time

Hold “MODE” for 2 seconds to enter into setting

Click”MAX/MIN” to switch MAX/MIN Hygro-thermometer

Hold”MAX/MIN”for 2seconds to clear MAX/MIN Hygro-thermometer 

Click “Up” to switch 12hr/24hr

Click “Down” to switch °C/°F

Hold”Down”for 2 seconds enter into/exit RCC

When ALARM rings, click “snooze” to enter into the snooze state every 5 minutes

3.3 TIME SET

Click”MODE” to switch current mode to time mode,the sequence of time setting: time mode 



 alarm mode 



 time mode….

Under time mode,hold “mode” key for 2 seconds to enter into time setting

The sequence of time setting: Time zone 



 Hour 



 Minute 



 Year (2000-2099) 



Month 



Date 



 Language 



 Exit 

There will have 1Hz flashing during setting

Press “MODE” to confirm the setting, and enter the next setting state

Press “Up” one time, the setting will go ahead for one step; hold the key for 2 seconds, it will 

run forward by 8 steps/second.

Press “Down” one time, the setting will backward for one step; hold for 2 seconds, it will run 

back by 8 steps/second.

The system will exit automatically if no key is operated in 30 seconds.

3.4 ALARM SET

Click”MODE” to switch time mode to alarm mode

Hold “MODE” key for 2 second to enter into alarm setting

The sequence of alarm setting: Hour 



 Minute 



 SNZ interval setting(1-20minutes,default 

5minutes) 



 exit

There will have 1Hz flashing during setting

Press “MODE” to confirm the setting, and enter the next setting state

Press “Up” one time, the setting will go ahead for one step; hold the keys for 2 seconds, it 

will run forward by 8 steps/seconds.

Press “Down” one time, the setting will backward for one step; hold for 2 seconds, it will run 

back by 8 steps/second.

The system will exit automatically if no key is operated in 30 seconds.

IV. fUNCTION AND EffECT

4.1 THE fUNCTION Of RCC RECEIVING 

1)   Conditions of entering RCC receiving status:

      a) Power on or reset to enter RCC receiving status

      b) Entering RCC receiving status at1:00, 2:00,3:00,4:00,5:00 automatically

      c) Press “DOWN” for 2 seconds to enter RCC receiving status forcedly 

2)   The time for RCC receiving is 7 minutes

3)   The displaying of icons during receiving:

      a) When it enters RCC receiving status, the tower-shaped part of RCC symbol on the LCD   

      will flash in the frequency of 1 Hz.

      b) When it is receiving the signal, the tower-shaped part of RCC symbol will be still, while       

      the symbol of RCC will flash in the frequency of 1 Hz.

1)

2)

3)

4)

5)

6)

7)

8)

1)

2)

3)

4)

5)

6)

7)

8)

1)

2)

3)

4)

5)

6)

7)

8)