EN - 38
6.3 Barometric Trend Pointer (A2)
The trend pointer displayed on the LCD (A2) indicates the trend of the Barometric pressure.
Indicating the barometric
pressure trend is rising
Indicating the barometric
pressure trend is steady
Indicating the barometric
pressure trend is falling
7. THERMOMETER
7.1 RF Transmission Procedure:
• The main unit automatically starts receiving transmission from outdoor thermo sensor for
outdoor temperature after weather condition setting.
• The thermo sensor unit will automatically transmit temperature signal to the main unit after
batteries inserted.
• For having more than one external transmitter (Maximum3), select the Channel, CH1, CH2
or CH3 to ensure each sensor is transmitting difference channel before inserting batteries.
The channel select switch (D5) is at the back of the thermo sensor.
• If main unit failed to receive transmission from outdoor thermo sensor in first 3 minutes after
the batteries inserted (“
- - . –
”display on the LCD), hold “Channel” button (B9) for 3 seconds
to receive transmission manually. RF icon “
” flashes on the LCD
Note:
Buttons (except “Channel”&“Light” buttons) will not function while scanning for thermo
sensor’s signal unless they are well received or stopped manually.
7.2 Temperature& Humidity
(1) Outdoor Temperature --- Channel Selection
• Press “CHANNEL” button (B9) to view the 3 Channel’s temperature.
The sequence is shown as follow:
PRESS “CHANNEL” button
PRESS “CHANNEL” button
PRESS “CHANNEL” button
CH
1
CH
2
CH
3
display the three
channels alternatively
• When viewing the record on CHANNEL 1 or 2, or 3, hold “CHANNEL” button (B9)
for 3 seconds to cancel the record on this channel manually, and receive the transmission
from channels automatically again.
Summary of Contents for WSC 2909
Page 53: ...Pozn mky Notatka Notes...
Page 54: ...Pozn mky Notatka Notes...
Page 55: ...Pozn mky Notatka Notes...
Page 56: ......
