EN
EN - 69
Date
-
Press the
MENU
key twice to select the DATE section, DATE section digits will start flash
-
ing. Enter DDMM-YY/DD-MM-WEEK/Time alarm display mode. (Default DD-MM-YY format),
press the
UP/+
or
DOWN/-
key to set the value.
-
Press the
ENTER
key to select the following modes, press the
UP/+
or
DOWN/-
key to set the
value:
• Select DD-MM or MM-DD format. (Default DD-MM format)
• Calendar setting (year/month/date)
• Time alarm setting. (Hours/minutes). Press the
ON/OFF
key to on/off the alarm. If alarm is
enabled, an alarm symbol
appears in the display indicating the alarm function has been
enabled.
Note:
When a set weather alarm condition has been triggered that particular alarm will sound
for 120 seconds. The corresponding value, “HI AL” or “LO AL” and the alarm symbol are flashing
until the weather condition doesn’t meet the user set level. Press any key to mute the alarm.
Wind
-
Press the
MENU
key the third time to select the WIND section, WIND section digits will start
flashing. Enter average wind speed / Gust display mode. (Default average wind speed), press
the
UP/+
or
DOWN/-
key to select the display.
-
Press
ENTER
key to select the following modes, then press the
UP/+
or
DOWN/-
key to
select the display or set the value:
• Select the wind speed unit between km/h, mph, m/s, knots, bft. (Default mph)
• The wind speed high alarm setting.
• The wind direction alarm setting.
• Reset the maximum wind speed value. When both the wind speed value and MAX icon are
flashing, hold the
ENTER
key for 3s, the maximum value will be reset to current reading.
Note:
Press the ON/OFF key to on/off the alarm. If alarm is enabled, an alarm symbol
appears
in the display indicating the alarm function has been enabled.
Rain
-
Press the
MENU
key the forth time to select the RAIN section, RAIN section digits will start
flashing. Enter rain display mode (1h, 24h, week, month and total rain. Default 1h), press the
UP
/+ or
DOWN
/- key to select the display.
-
Press
ENTER
key to select the following modes, then press the
UP/+
or
DOWN/-
key to
select the display or set the value:
• Select rain fall unit between mm, inch. (Default mm)
• The rain high alarm setting. Press the ON/OFF key to on/off the alarm. If alarm is enabled,
an alarm symbol
, appears in the display indicating the alarm function has been enabled.
Summary of Contents for WSP 2080 r WIND
