EN - 70
• Reset the maximum rainfall value. When both the rain value and MAX icon are flashing,
hold the
ENTER
key for 3s, the maximum rain value will be reset to current reading.
• Clear the total rainfall. When both the total rain value and CLEAR word are flashing, hold
the
ENTER
key for 3s, the total value will be reset to zero. 1h, 24h, week, month rain value
will be reset to zero automatically.
Press
-
Press the
MENU
key the fifth time to select the PRESSURE section, PRESSURE section
digits will start flashing. Enter the pressure display mode (relative and absolute pressure.
Default absolute pressure), press the
UP/+
or
DOWN/-
key to select the display.
-
Press
ENTER
key to select the following modes, then press the
UP/+
or
DOWN/-
key to
select the display or set the value:
• Select pressure unit between hPa, mmHg, inHg. (Default hPa).
• The relative pressure setting. (If select absolute pressure display, skip this step).
• The pressure high alarm setting. Press the
ON/OFF
key to on/off the alarm. If alarm is
enabled, an alarm symbol
appears in the display indicating the alarm function has been
enabled.
• The pressure low alarm setting. Press the
ON/OFF
key to on/off the alarm. If alarm is ena
-
bled, an alarm symbol
appears in the display indicating the alarm function has been
enabled.
• Reset the maximum pressure value. When both the pressure value and MAX icon are flashing,
hold the
ENTER
key for 3s, the maximum pressure value will be reset to current reading.
• Reset the minimum pressure value. When both the pressure value and MIN icon are flashing,
hold the
ENTER
key for 3s, the minimum pressure value will be reset to current reading.
Pressure history bar graph
Press the
MENU
key the sixth time to select the PRESS HISTORY section, PRESSURE
HISTORY section digit will start flashing. Press the
UP/+
or
DOWN/-
key to select the bar graph
time scale between 12hrs and 24 hrs for pressure history.
Weather forecast tendency
TENDENCY
-
Press the
MENU
key the seventh time to select the TENDENCY section, TENDENCY section
digits will start flashing. Enter the weather forecast tendency display mode(SUNNY, PARTLY
CLOUDY and CLOUDY, RAINY/SNOW icon), press the
UP/+
or
DOWN/-
key to select the
display.
-
Press
ENTER
key to select the following modes, then press the
UP/+
or
DOWN/-
key to
select the display or set the value:
• Set the pressure threshold from 2-4hPa (default 2hPa)
• Set the storm threshold from 3-9hPa (default 4hPa)
Summary of Contents for WSP 2080 r WIND
