EN
EN - 81
1) Find the folder where the “EasyWeather.exe” file is located
2) Create a file name “reg_graph.bat” file with wordpad or notepad editor program
3) Type “regsvr32 easyweather.ocx” and save the reg_graph.bat file
4) Double click “reg_graph.bat” file and it should register the graphic driver again. If successful,
then the following window will be displayed:
Special Notes about time synchronization between PC and sub-station:
The PC software obtained its own time scale through the time interval marker from the
base station history data, and the PC software automatically synchronizes the weather
data with a time stamp calculated. Thus the history data file can have different time when
the PC time and base station time is not same. In order to make the time scale correct,
remember to set the PC time and base station time same, and further to this, no weather
data is allowed to be missed or over-written. If history weather memory on the base sta
-
tion is cleared by manual setting, then the history weather data since last uploading is lost
permanently.
Before memory is used up (memory icon on LCD display showing 100% full), remember to
upload weather history data to PC periodically.
If there is a reset happened for the rain fall on the base station, then there will be rain fall value
discrepancy between PC and base station.
LEGAL NOTES
• We reserve the right to delete or change any image whether or not purposely uploaded onto
the server by a user of the touch screen weather station and the EasyWeather software
products.
• The EasyWeather software products are protected by copyright laws and international copy
-
right treaties as well as other intellectual property laws and treaties.
• You may not copy the printed materials accompanying the products.
Summary of Contents for WSP 2080 r WIND
