FEATURES OF YOUR HYUNDAI
1- 103
HOW TO PRESET STATIONS
Six AM and twelve FM stations may be
programmed into the memory of the
radio. Then, by simply pressing the
band select button and/or one of the
six station select buttons, you may
recall any of these stations instantly.
To program the stations, follow these
steps:
o Press band selector to set the band
for AM, FM and FM2.
o Select the desired station to be
stored by seek, scan or manual
tuning.
o Determine the preset station select
button you wish to use to access
that station.
o Press the station select button for
more than two seconds. A select
button indicator will show in the dis-
play indicating which select button
you have depressed. The frequency
display will flash after it has been
stored into the memory. You should
then release the button, and pro-
ceed to program the next desired
station. A total of 18 stations can be
programmed by selecting one AM
and two FM station per button.
o When completed, any preset station
may be recalled by selecting AM,
FM or FM2 band and the appropriate
station button.
6. BAND Selector
Pressing the button changes the AM,
FM1 and FM2 bands. The mode se-
lected is shown on the display.
7. EQ Button
Press the EQ button to select the
CLASSIC, JAZZ, ROCK and DEFEAT
MODE for the desired tone quality.
Each press of the button changes the
display as follows;
8. Best Station Memory Button
(BSM) (If installed)
When the BSM button is pressed for
two seconds or longer, the six chan-
nels from the highest field intensity are
selected next and stored in memory.
The stations selected are stored in the
sequence frequency from the first pre-
set key.
9. SCAN Button (If installed)
When the scan button is pressed, the
frequency will increase and the receiv-
able stations will be tuned in one after
another, receiving each station for 5
seconds. To stop scanning, press the
scan button again.
CLASSIC
→
JAZZ
→
ROCK
→
DEFEAT
↑
