1- 16
FEATURES OF YOUR HYUNDAI
To memorize the driving position
1. Turn the ignition key "ON".
2. Adjust the driver's seat, outside rear-
view mirrors and steering wheel col-
umn (if installed the steering wheel
electric tilt and telescopic) to the
desired position.
3. Push the "M" button on the I.M.S
until the signal beeps.
4. Within five seconds, push button "1"
or "2" until the signal beeps twice.
The beep sounds mean that the
positions are memorized in the
I.M.S.
To activate the memorized posi-
tion
When you push button "1" or "2", the
driving position will be automatically
adjusted to the position recorded for
that button.
To activate the "AUTO" button
When the "AUTO" button is "ON", it will
move the driver's seat forward or rear-
ward and steering wheel column up/
down or inward/outward, so you can
get on or off comfortably.
o It will move driver's seat rearward
and steering wheel column up/down
or inward/outward, when the igni-
tion key is pulled out.
o It will move driver's seat forward
and steering wheel column to the
original position, when the ignition
key is inserted.
o While the vehicle is moving back-
ward, the outside rearview mirrors
will automatically move downward
to change the area visible with the
outside mirrors.
NOTE:
If the remote control outside rear-
view mirror switch knob is located
in the middle position of the switch,
the outside rearview mirrors will
not operate while the vehicle is mov-
ing backward. When the shift lever
is moved the "R" position, only the
passenger's outside rearview mir-
ror will move downward.
!
CAUTION:
In the following conditions, the I.M.S
will not operate.
1. When the "1" or "2" button is not
pushed within five seconds.
2. When the seat is being adjusted.
3. When the "STOP" button is
pushed.