FEATURES OF YOUR HYUNDAI
1- 21
B180A01L-GAT
SEAT BELTS-Driver's 3-Point
System with Emergency Lock-
ing Retractor
To Fasten Your Belt
To fasten your seat belt, pull it out of
the retractor and insert the metal tab
into the buckle. There will be an au-
dible "click" when the tab locks into the
buckle.
The seat belt automatically adjusts to
the proper length only after the lap belt
is adjusted manually so that it fits
snugly around your hips. If you lean
forward in a slow, easy motion, the belt
will extend and let you move around. If
there is a sudden stop or impact, how-
ever, the belt will lock into position. It
Release the button to lock the anchor
into position. Try sliding the height
adjuster to make sure that it has locked
into the position.
B180A01L
B200A01A-GAT
Adjusting Your Seat Belt
You should place the belt as low as
possible on your hips, not on your
waist. If the belt is located too high on
your body, you could slide under it in
case of accident or a sudden stop.
This could result of death, serious
injury or property damage. Both arms
should not be under or over the belt.
Rather, one should be over and the
other under, as shown in the illustra-
tion.
B200A01L
will also lock if you try to lean forward
too quickly. Check to make sure that
the belt is properly locked and that the
belt is not twisted.
!
WARNING:
o The height adjuster must be in
the locked position when the
vehicle is moving.
o The misadjustment of height of
the shoulder belt could reduce
the effectiveness of the seat belt
in a crash.