FEATURES OF YOUR HYUNDAI
1- 85
2. Push the "TEMP" button to set the
desired temperature.
The temperature will increase to the
maximum 32 C(90 F) by pushing
on the button. Each push of the
button will cause the temperature to
increase by 0.5 C(1 F).
The temperature will decrease to
the minimum 17 C(62 F) by push-
ing on the button. Each push of
the button will cause the tempera-
ture to decrease by 0.5 °C(1 F).
NOTE:
If the battery has been discharged
or disconnected, the temperature
mode will reset to centigrade de-
gree.
The FATC (Full Automatic Tempera-
ture Control) system automatically
controls the heating and cooling by
doing as follows:
1. Push the "AUTO" switch. The indi-
cator light will illuminate confirming
that the Face, Floor and/or Bi-Level
modes as well as the blower speed
and, air conditioner will be controlled
automatically.
Photo sensor
B970C01L
B970C03Y-GAT
Automatic Operation
NOTE:
Never place things on the sensor
which is located in the car on the
instrument panel to ensure better
control of the heating and cooling
system.
B970C02L
B970C03L
This is a normal condition and you
can adjust the temperature mode
from centigrade to farenheit as fol-
lows;
Press the TEMP button down 3 sec-
onds or more with the AMB button
held down. The display shows that
the unit of temperature is adjusted
to contigrade or fahrenheit.
( C
→
→
→
→
→
F or F
→
→
→
→
→
C)
