New R-Line Refuse Collection Micro
User Manual RCM10
5
2
Safety Rules
This chapter covers all the safety issues related to
the installation of the RCM10. In order to avoid
personal injury to the operator or (serious) damage
to the materials, please operate strictly following the
rules defined in this chapter.
Please provide this user manual, including all the
safety rules mentioned in it, to all staff involved in
the installation of the RCM10 and require them to
read carefully.
NOTE:
If anything is unclear about the
safety rules, please contact the
equipment manufacturer for proper
explanation.
2.1
Regulations and prohibitions concerning
machine transportation
Goods always travel at the buyer's risk as and from
delivery to the carrier. Transport is always to the
buyer's charge unless otherwise agreed at the time
of drawing up the contract.
The lifting of the machine, excepting via vehicle
lifts, is expressly forbidden without prior
consultation with HYVA.
The machine should always be transported by
driving or using suitable equipment built for
transporting motor-vehicles. The manufacturer
expressly forbids the lifting of the vehicle with
any type of system.
Following transportation, check the machine
has suffered no damage. In the event of
damage, it is forbidden to start up the machine.
Inform the authorised head immediately.
2.2
Preparations for safe transport
Check whether the connection between the
plug and the adapter is disconnected.
Check to ensure the cover plate/door of the
feed inlet is locked.
Check whether all the doors and valves are
locked tightly.
If a foldaway hook is used for your equipment, it
shall also be locked tightly.
Check whether the hook placed on the lifting
support for handling has been removed.
2.3
Control panel
There is an emergency stop button on the
control panel. In case of emergency, press this
button to stop all the moving parts immediately
(only superstructure).
A release button is provided on the master
control panel. In case of emergency, press this
button to retract the garbage compaction
mechanism back to its initial position. When
this
button
is
released,
the
garbage
compaction mechanism will stop retracting.
Even when the emergency stop button has
been pressed or even when the door is in open
state, this function shall still be able to work
properly.
2.4
Preparations for safe use
Do not remove any warning mark or plate from
the equipment. If the content on such warning
mark or plate becomes illegible, replace with
the same one immediately.
Make sure that all the staff operating the
equipment or conducting daily maintenance for
the equipment can find this user manual easily
for reference.
Make sure that the RCM10 is operated only by
the staff familiar with the performance of such
equipment. Such staff should know all the
knowledge concerning the equipment and get
familiar with the content of this user manual.
2.5
Safety measures in the course of use
In adverse weather conditions, please do not
use this RCM10.
During the course of operation, it is strictly
prohibited for any person to enter or step onto
the RCM10.
There should be no obstacle, which may affect
the operation or movement of the equipment,
around the RCM10.
Technical malfunctions may be very dangerous.
Therefore, in case of any such malfunctions,
contact the person in charge of installation
supervision immediately. The power supply to
the RCM10 must be cut off until the dangers are
removed,
It is strictly prohibited to put any flammable,
explosive articles or erosive chemicals and
other hazardous materials into the RCM10.
When any solid or fragile garbage (such as
glass or plastic) is processed with the
