New R-Line Refuse Collection Micro
User Manual RCM10
18
3.5
Functioning principle
Introduction
The work cycle is described below, subdivided into the areas/phases of the
various work operations.
Sitting in the cab (1), the operator drives the vehicle
(Vehicle frame) to the container pick-up area.
The operator stops the vehicle (keeping the engine
switched on), then uses the commands in the cab
(figure
“A” or “B”, based on the version supplied) to
engage the power take-off (via the couplings of the
gearbox) to activate the hydraulic circuit.
The operator engages the parking brake, exits the
cab, and goes to the container pick-up area.
The operator prepares the hook-up system based
on the type of bin to be picked up (figure
“C”).
To be defined...