user manual
IBU3 User Manual rev. 1.0
I.B.U. Electronics
http://www.ibu-electronics.com
servo setup
For traverse servo you can set the speed, the type of actuator, normal or 360 ° (also called continuous rotation or robotic servo), the
direction, the maximum travel in both directions (ATV) and the neutral position.
For barrel servo you can set the speed, the type of actuator, normal or 360 ° (also called continuous rotation or robotic servo), the
direction, the maximum travel in both directions (ATV) and the neutral position.
In Tank version the auxiliary servo can be used for an additional function (for example, open a hatch), it is controlled by a radio channel
or by a diagonal (see Radio setup). It has an ON / OFF operation, and can be configured in speed, direction and (ATV)
In the future it will be released the Halftrack functionality and this servo (if selected Halftrack mode) will be dedicated to the steering.
After configuration save the settings by clicking on the command write.
