I-CON Systems, Inc., for product support call 1-866-730-7192 or visit us online at support.i-con.com
COBALT Pro
™
Exposed Sensor Flush Valve
Installation Instructions
One or more products contained herein are protected by U.S. Patent with other undergoing the patent process www.i-con.com/patents
Part No. 101819 : 3000 Series
Vacuum Breaker Assembly Configurations
FRICTION WASHER
VACUUM
BREAKER NUT
SPUD NUT
RUBBER
GASKET
HORIZONTAL
TUBE
ELBOW NUT
RUBBER GASKET
SPUD
ESCUTCHEON
FRICTION
WASHER
FRICTION
WASHER
RUBBER
GASKET
VACUUM
BREAKER NUT
SPUD NUT
FRICTION
WASHER
ELBOW
RUBBER
GASKET
ELBOW
NUT
VACUUM
BREAKER
TUBE
VACUUM
BREAKER
FRICTION
WASHER
VACUUM
BREAKER
3/4” VACUUM
BREAKER TUBE
1-1/2” VACUUM
BREAKER TUBE
1-1/4” VACUUM
BREAKER TUBE
FRICTION WASHER
SPUD
ESCUTCHEON
Rear Spud
Top Spud
page6
Rev 080323
Step 5
Once properly aligned, tighten connections with a smooth jaw
wrench.
See I-CON Flush Connection Guide for details on available options.
ProLAST
®
T-SEAL & CONTROL MODULE
INSTALLATION
Step 1
Insert ProLAST® T-Seal into flush valve body.
Step 2
Place square-profile O-ring into groove on bottom of flush valve
cap assembly. Then place the cap assembly onto flush valve
body.