® Waves System
V 1.1 - 2009
I.D. AL - EventPlayer MP3/Wav/DMX player - User manual
6 - USB Link (device)
The EventPlayer reads files stored on a SD memory, a
USB stick or a USB hard disk.
To update a USB stick or a USB hard disk, you just have
to connect these elements directly to a computer. A card
reader is required to update a SD card.
If you do not have an external card reader or one on your
computer, you can use the front USB port to access the
card.
To set-up the player in USB mode, switch the EventPlayer
on and connect the USB cable. The computer will then
detect this new peripheral and display it in your file
manager using the "Mass Storage" standard driver.
7 - HOST USB Link
The HOST USB port allows data media connection (USB
stick, hard disk).
Mass media (stick or HDD)
Data media with USB flash drive or external hard disk is
an alternative to SD memory card. Simply connect the
memory stick or a hard disk on this USB port with the
same file organisation. This memory must be formatted in
FAT or FAT32 (see chapter related to organisation of
directories and files).
If you connect a stick or a hard disk, you must remove
the SD card from the player. If a SD card is present, it will
be given priority and the stick or the hard disk will be
ignored.
When inserting or removing a SD card or a USB stick, the player must be switched off.
- 21 -
USB (device)
USB Host
Key or HDD USB
