background image

4

Safety and Warnings

NOTE

This mark is applied to indicate that the equipment conforms to European 

safety and electro-magnetic compatibility standards.

WARNING!

Main Supply: This equipment is designed to operate from a 100-240 Volt, 

50/60Hz AC main supply. The use of other power sources may damage this 

equipment. Check that the voltage marked on the rating plate located at 

the rear of the power adaptor states 100-240V. The manufacturer will NOT 

accept responsibility for damage or injury caused by connecting to the wrong 

voltage.

WARNING!

Main Adaptor: The supplied power adaptor is compatible with a standard main 

socket. NB. If the power adaptor or lead gets damaged, it must be replaced 

by a qualified service agent with an approved adaptor of the same type and 

rating.

WARNING!

Dangerous voltage constituting a risk of electric shock is present inside this 

equipment.

WARNINGS!

The main plug shall be the main disconnect device and shall remain operable 

at all times.

Do not push objects into holes and ventilation slots.

Do not expose this product to dripping or splashing or place any objects filled 

with liquids on or near the product.

Do not place a naked flame source, such as lighted candles, on or near this 

product. 

Do not attempt to repair this product yourself. Always use a qualified service 

agent to perform adjustments or repairs.

Summary of Contents for iView Stand UID0099













Reviews: