Essentials For Beginners
Before hitting on the road with your
GPS Logger
, please read the following information thoroughly to ensure the
GPS Logger
to work properly,
lest any incorrect operation ruin your precious travel memories.
GPS Logger wear & attachment
When taking
GPS Logger
from indoors to outdoors, it usually takes longer to get a GPS fix. Please place your
GPS Logger
face-up toward the
sky and press the button to acquire a GPS fix.
Tip
: If
GPS Logger
functions normally and gets a GPS fix, both the red and blue LED indicators blink simultaneously twice, indicating the current GPS information is
logged successfully to the device memory.
Please always place your
GPS Logger
exposed to the open sky to ensure the successful GPS fix acquisition. Refer to the illustration below to
expose your
GPS Logger
as much as possible in the open sky to ensure stable and successful GPS fix acquisition.
face-up
exposed to the sky
near the car windshield
face-down
inside backpack/ bag or pocket
on the car backseats
GPS Logger setup
GPS Logger
:
GPS Logger
is water-resistant, designed for a broader use. Multiple tracking modes with different data logging intervals work for
both short & long journey.
Note
: C lick
on the main menu bar of @trip PC to configure your GPS Logger. For detailed setup information, please refer to
Hardware & Software Settings
.
Camera/ Camera phones
:
@trip PC
automatically adds GPS information to the photos taken on your journey with fussy time mapping;
therefore, setting up a correct time for your camera/ camera phone will enhance the mapping procedure.
Note
: Besides auto-mapping, you can also manually map the photos to your Trip. For more information, please refer to
C ompose Trip
.
Safety information
Please do not leave your
GPS Logger
exposed to high temperature for a long time, such as on the inside of the windshield of a car at noon in
the summer, to avoid the overheat to cause any device malfunction or danger.
Next
Summary of Contents for GT-120
Page 31: ...Next...
Page 34: ...Next...
