User’s Manual
12
FRONT PANEL CONTROL
•
Power
Button:
Press this button to switch ON/OFF of monitor’s power.
•
Power Indicator:
Green — Power On mode.
Orange — Power Saving mode.
•
MENU / ENTER:
1. Activates the OSD menu or confirms adjustments to settings.
2. Exit OSD volume display when in volume OSD status.
•
Volume < >:
1. Activates the volume control when the OSD is OFF.
2. Navigate through adjustment icons when OSD is ON or adjust a function when
function is activated.
•
Auto Adjust button: (for D-sub only)
When OSD menu is in off status, press and hold this button to activate the Auto
Adjustment function.
(The Auto Adjustment function is used to optimized the H-Position, V-Position, Clock and
Phase.)
NOTES:
•
Do not install the monitor in a location near heat sources such as radiators or air dusts,
or in a place subject to direct sunlight, or excessive dust or mechanical vibration or
shock.
•
Save the original shipping box and packing materials, as they will come in handy if you
ever have to ship your monitor.
•
For maximum protection, repackage your monitor as it was originally packed at the
factory.
•
To keep the monitor looking new, periodically clean it with a soft cloth. Stubborn stains
may be removed with a cloth lightly dampened with a mild detergent solution. Never use
strong solvents such as thinner, benzene, or abrasive cleaners, since these will damage
the cabinet. As a safety precaution, always unplug the monitor before cleaning it.
•
Function Key Lock:
Press the <
「
Volume -
」
, >
「
」
and the
「
Menu
」
buttons simultaneously to
enable the Function Key Lock. When the Function Key Lock is enabled, only the Power
button is active. Press the <
「
Volume -
」
, >
「
」
and the
「
Menu
」
buttons
simultaneously again to unlock the function keys.