23
sinus 5 GO
the cable into the sinus 5 GO and the other end into a suitable
USB socket of a mains plug or device with supply current (e.g.
computer). As soon as the charging function starts, the light
flashes red once per second. The sinus 5 GO is now in charging
mode. When the battery is charged, the colour of the light signal
changes to green and flashes green once per second. The sinus
5 GO is now charged. If you remove the charging cable, the light
signal changes again and flashes green once every 12 seconds.
The sinus 5 GO is now switched on.
Note:
Magnetic field pulses are only produced as long as the
electronics can handle the voltage of the battery. We therefore
recommend charging the device in good time. For ideal battery
care, we recommend charging the sinus 5 GO once a month.
Use of the sinus Converter
Insert the sinus Converter into the opening on the front of the
sinus 5 GO, and push the converter all the way to the stop. The
sinus Converter must be plugged into the sinus 5 GO with the
three golden strips facing upwards. If you have placed the si-
nus Converter correctly, the labelling is easily readable from the
outside.
If you do not need a frequency, you can simply pull out
this converter and store it at least 1 meter away from the device.
When should the sinus 5 GO not be used?
There are currently no known restrictions.
Note on the water resistance of the device
The sinus 5 GO housing is not waterproof.
Cleaning
Clean the outside of the device housing with a soft, clean cloth.
Please do not use harsh chemical household cleaners.
Summary of Contents for sinus 5 GO
