28
29
Follow the instructions to enter the color code:
I. Press and hold the button until it displays the desired color.
The colors appear in this order: green, blue, red, white.
II. Release the button and repeat the procedure for the next color.
III. Repeat the procedure for all 6 colors.
After entering the correct color code, I LOCK IT GPS will open
automatically. If you have entered an incorrect color code, the
LED will flash red briefly and you can then start a new color
code entry.
• After entering a color, you have 5 seconds to start the
next entry.
• An incomplete entry is cancelled after 5 seconds and
is indicated by flashing 3 times.
• If the color code is entered incorrectly 3 times
within 3 minutes, the input is blocked for 5 minutes.
Our I LOCK IT Channel on
www.youtube.de presents a video
on the subject of color codes.
www.youtube.com/ILOCKIT-bike
OPERATION
3.2. LOCKING I LOCK IT GPS
I LOCK IT GPS offers several locking options:
Locking I LOCK IT GPS is only possible
when the bike is not in motion.
If an attempt is made to lock I LOCK IT GPS while riding, the
button will flash red, an acoustic warning tone will sound and
no locking process will take place.
AUTOMATIC LOCKING
If automatic locking is enabled in the I LOCK IT settings,
I LOCK IT GPS will lock up as soon as you move away from
your bike. The distance for automatic locking can be
configured in the I LOCK IT app.
Before closing, I LOCK IT GPS will emit an audible tone to
indicate the following lock.
Upon successful completion, the I LOCK IT GPS button will
illuminate red for 5 seconds and your bike will be secured.
The I LOCK IT app must be active on your smart-
phone in the background and connected to your
I LOCK IT GPS.
OPERATION